With your phone, you have received a scratch card containing a prepaid code that entitles you to download the iGO My way navigation software and one free content package including maps, places of interest and other content.

You can install iGO My way on a single Windows MobileTM powered cell phone equipped with a MicroSD card. After installation you will be free to copy the software and maps to another SD card, and use the navigation application with that card. You are advised to make a backup copy for safety purposes. If necessary (for example after a factory reset), you can install the application again, but only on the same phone on which it was installed for the first time.

The overview of the setup process:
I. Insert a MicroSD card into the device, then download iGO My way from the Naviextras.com website, and install the navigation software on the SD card.
II. Start iGO My way on your device, and complete the initial setup.
III. Register on the Naviextras.com website, and redeem your prepaid code. Connect your device or SD card to your PC, then use Naviextras.com Naviextras Toolbox to download the latest content package for the software.
Here are the detailed instructions:

I. Downloading iGO My way
Before you start:

• It is recommended to fully charge your phone before the installation or to connect it to a power supply or USB port.
• You will need a working Internet connection to install the product. Using a Wi-Fi or 3G connection is recommended.
• A PC with Microsoft Windows (Windows XP SP2 or later) and a working Internet connection is necessary for the activation of the software and for the installation of maps and other content.
• You will need a MicroSD memory card. It is recommended to use a card with a free capacity of at least 1 GB. All navigation-related content will be permanently stored on the memory card. To enable future map updates and the addition of extra maps, we advise you to use a bigger memory card. Also, you can copy your navigation application and contents to a larger capacity card anytime later.

Instructions:
This description is based on Windows Mobile 6.5. There may be slight differences depending on your operation system version and on the security configuration.

1. Insert a MicroSD card into the memory card slot of your phone.
2. On your phone, start Internet Explorer and enter the following web address:
https://winmo.naviextras.com/dlexe
3. Depending on your security settings, you might receive a warning about the website’s security certificate.
Tap Yes to continue to the site.
4. On the web page, tap Download.
5. Depending on the Internet Explorer version, either

• tick the ‘Open file after download’ checkbox and confirm the download, or
• open the Menu and choose the Open option for convenience.

6. Please wait until the download completes. This may take a few minutes depending on the speed of your network connection (eg. it takes about 2 minutes over a 2 Mbit/sec WiFi connection).
7. If you selected the ‘Open the file after download’ / ’Open’ option, the application installer starts automatically.
If you did not use the ‘Open’ option, locate the downloaded application in the File Explorer and run it from there.
8. You will probably receive a security warning that says “The program is from an unknown publisher”. Tap Yes to continue.
9. Please wait until the installation is finished. The application will automatically create several files and folders on the inserted SD card, which you will need to be able to continue the setup on your PC.

II. Starting iGO My way for the first time
1. Open the navigation software:
In the Start menu, tap the ‘iGO My way’ icon.
2. During the first start-up, you will be asked to review the basic settings and modify them as necessary.
On the first setup screen, select the application language, then tap Next.
3. Read the End User Licence Agreement, then tap Accept to continue.
4. On the next screen, tap Next to start the configuration wizard.
5. Select the voice guidance profile, then tap Next.
6. Review the settings for time format and measurement units, then tap Next.
7. Review the settings for route planning, then tap Next.
8. Tap Finish to complete the configuration wizard.
9. A message is displayed saying that you should continue the installation based on this set of instructions. Tap OK.

III. Downloading maps and activating the navigation software
1. On your PC, open an Internet browser and go to winmo.naviextras.com.
2. Create a free user account or log in using your existing Naviextras.com username and password.

• To register, click Register or Create a user profile on the top left part of the screen, then follow the instructions.

3. On the Naviextras.com home page, click Redeem your code.
4. Scratch the surface of the scratch card that you received with your phone.
5. Enter the ‘Prepaid code’ on the website, then click Redeem the code.
6. You will be shown which content package you can download and install for free. If you have several choices available , review the list carefully before making a decision. (You can purchase additional maps any time later at the Naviextras.com site.)
7. Select the content package that you wish to install for free, and click Choose. The selected content will be added to your cart.
8. Click Checkout to confirm your selection.
9. In the menu bar at the top of the Naviextras.com website, click Downloads.

• Alternatively, type: winmo.naviextras.com/shop/portal/downloads.

10. On the download page, look for ‘Toolbox’ and click Download to get the Naviextras Toolbox application.

• Naviextras Toolbox will be used to download and install the maps and associated content.

11. Open the downloaded file, then follow the instructions on the screen to install Naviextras.com Naviextras Toolbox.
12. Connect the phone to your PC, with the SD card you used during the download process still inserted in it. Use the USB cable supplied with the phone. The phone must be set to mass storage mode instead of Active Sync.
Setting the phone to mass storage mode:
a) On the phone, tap Start, then tap Settings.
b) On the Basic Settings tab, tap General Settings > USB Connection > Mass Storage Mode > Storage card.

• Alternatively, you can insert the SD card into a memory card reader connected to your PC.

13. Use Naviextras.com Naviextras Toolbox to download and install the selected content package to the SD card.

• For detailed instructions on using Naviextras Toolbox, click Support in the menu bar at the top of the Naviextras.com website, then click Go to Naviextras Toolbox guides in the ‘Toolbox How-to’ box.

14. After downloading and transferring your contents, use the ‘Safely Remove Hardware’ option in the Notification area of the Windows Taskbar to disconnect your phone or SD card reader.

• If you used a memory card reader, insert the SD card into the phone.

At this point, setup is complete and your iGO My way navigation software is ready to use.

Additional maps, map updates and more content
You can purchase additional maps, map updates and other navigation content (such as 3D city models) for iGO My way. Please visit winmo.naviextras.com for more information.

The content of this brochure is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment of NNG Software Developing and Commercial Llc. The editors assume no responsibility or liability for any errors or inaccuracies that may appear in this document. Except of permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any mean, electronic, mechanical, recording, or otherwise, without the prior written permission of NNG Software Developing and Commercial Llc. All trademarks, brand, company names mentioned herein belong to their respective owners.